Overview
The printer's front access door may not close completely if pushed only from the left side (see sample below). If this is the case, the printer will not go into Ready mode.
| Click Image to Enlarge |
|
| Notice the difference in the gap on the left and right-hand sides of the front door cover if it is not closed completely. |
Recommendation
The front door should be closed by pushing on both the left and the right-hand sides of the door at the same time, or on its center, as shown in the images below.
Still need help?
Please contact Lexmark Technical Support if you need additional assistance.
NOTE: When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating these
Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.
LEGACY ID: FA908