Skip to Content Information Center
Lexmark MX711

Lexmark MX711

Lexmark MX71x ? Intervention Messages Show Inaccurate Graphic Display

What you will see

Two intervention messages displayed on a Lexmark MX710 or MX711 Multifunction Printer might not match with their corresponding images, although the text instruction is correct.

Examples of intervention messages

Two such intervention messages have been observed so far and the inaccuracy depends on the Firmware (FW) version installed in the printer.

Lexmark MX71x with FW level EC 4.1Close Rear Door

Click Image to Enlarge
The printer shows the correct message “Close Rear Door” but the illustration on the screen indicates an Open Multipurpose (MP) Feeder.

Lexmark MX71x with FW level EC5Close Upper Rear Door

Click Image to Enlarge
The message on the screen says “Close Upper Rear Door” though this model has only one rear door. The illustration is much more confusing as it seems to point to the ADF and not the rear door.

Work in progress

This document’s purpose is to inform users that Lexmark is aware of these inaccuracies, and as of this writing the Product Engineering team is working to have this corrected with the products' next firmware release. We apologize for any confusion this may have caused.

Contacting Lexmark

If you require additional assistance, please close this window and locate

Get In Touch with Lexmark! for contact information.
When calling for support, you will need your printer model/machine type and serial number (SN). Should you need help locating these, xref_HO3865_xref.

Please be near the products described in this article to expedite the support process and reduce callbacks.


Was this article helpful?