Skip to Content Information Center
Lexmark CS727

Lexmark CS727

NTP Settings Do Not Clear After a Factory Reset or an Out-of-Service Erase Is Performed

Affected Products:


Single-Function: C4150, CS310, CS317, CS410, CS417, CS510, CS517,

Multifunction: CX310, CX317, CX410, CX417, CX510, CX517, XC2130, XC2132, XC4140, XC4143, XC4150, XC4153, XC6152, XC6153


Multifunction: MX310, MX317, MX410, MX417, MX510, MX511, MX517, MX610, MX611, MX617, MX710, MX711, MX717, MX718, XM1145, XM3150, XM5163, XM5170, XM5263, XM5270, XM7155, XM7163, XM7170, XM7263, XM7270

Issue Description:

Settings for NTP are not cleared after Factory Reset or Out of service erase. The out of service wipe should erase the value of the NTP server.


A PE-released version of firmware .xx.P703, or greater, addresses this issue. Please contact Lexmark Technical support and provide this article ID#SO8432 to the support agent when requesting this firmware.

Still Need Help?

Have the following available when calling Lexmark Technical Support;

  • Printer model(s)

  • Printer serial number


¿Este artículo ha sido útil?