Skip to Content Information Center
Lexmark XC2132

Lexmark XC2132

`202.02? Paper Jam Error Messages on the Lexmark CS310, CS410, CS510, CX310, CX410, and CX510


The 202.02 Paper Jam error indicates one or more sheets of paper are jammed in the printer's standard output bin, or that the Fuser exit flag is stuck. When the error message appears on the control panel display it will include the area of the printer where the jam occurred.

Paper Jam Locations

The paper jam can be located in either one of the two locations below:

LocationClick Image to Enlarge
Standard Output Bin Jam
Fuser Area Jam


1Be sure any previous jams have been completely removed; and refer to 202.xx Paper Jam Removal.
2Make sure that the affected paper tray (could be any input source) is loaded properly; please refer to.
3If issue persists after performing the steps mentioned above, an issue may exist within the machine's hardware. Please contact Lexmark Technical Support for other troubleshooting suggestions.

Contacting Lexmark

Please contact Lexmark Technical Support if you need additional assistance.
When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating your printer's model type and serial number, How to Locate the Serial Number, TLI, Config ID, and Machine Type on a Lexmark CS310, CS410, CS510, CX310, CX410, and CX510.

Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.


Was this article helpful?