Overview
Two or more horizontal lines or bands of toner are appearing on the printed pages, such as those illustrated in the image below. The lines may be darker or lighter in color than the rest of the page. Also the lines or bands will not be at a repeating distance apart.
NOTE: The lines run horizontally across the page, but will appear vertical when you print in landscape mode.
Print Defect Sample
This article will help you confirm the problem. Please refer to the directions in the table below to help determine the hardware part causing the issue.
Troubleshooting
| Steps | Actions |
| 1 | In most cases, a defective Photoconductor Unit (PCU) causes horizontal lines. This is especially true if the streaks are of only one color. Print some sample pages and verify whether the printout has improved. |
| 2 | Since the PCU is a Customer Replaceable Unit (CRU), the services of a technician are not required. Try replacing the PCU if you have an extra one in stock. |
| 3 | If you do not have an extra PCU in stock, or should the issue continue after you have replaced the PCU,please contact Lexmark Technical Support for additional information and assistance.
Note: If the source of the problem appears to be the PCU, it may be eligible for a warranty replacement; this is dependent, however, on the age and usage of the photoconductor.
|
Contacting Lexmark
Please contact Lexmark Technical Support if you need additional assistance.
NOTE: When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating your printer's model type and serial number, How to Locate the Serial Number, TLI, Config ID, and Machine Type on a Lexmark CS310, CS410, CS510, CX310, CX410, and CX510.
Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.
LEGACY ID: SO7210