Skip to Content Information Center
Lexmark XM9165

Lexmark XM9165

Lexmark MS911 or MX91x ? Service Engine Error Appears After Installing the Booklet Finisher

What you will see

After installing a standard or booklet finisher in a Lexmark MS911 or MX91x, the printer posts a Service Engine error.

Possible cause

This message might occur due to a piece of tape inside the booklet finisher that may not have been removed during unpacking. The remaining tape could cause a finisher component's motion to be impeded, thus resulting in a Service Engine error.

Suggested Remedy

During booklet finisher installation, make sure to remove all the packaging tape used to hold the components inside the finisher. The images below show the orange tape that was left inside the booklet finisher mechanism area.

Click Images to Enlarge

If you are unable to locate the remaining tape, please contact Lexmark Technical Support to set up service for the finisher.

Contacting Lexmark

If you require additional assistance, please close this window and locate

Get In Touch with Lexmark! for contact information.
When calling for support, you will need your printer model/machine type and serial number (SN). If you need help locating these, Serial Number, Machine Type, and Configuration ID Location for the Lexmark MS, MX, XM, CS, CX, XC, 91X - 92x Series Printers and MFPs.

Please be near the products described in this article to expedite the support process and reduce callbacks.


Was this article helpful?