Skip to Content Information Center
Lexmark XM9165

Lexmark XM9165

Unable to release jobs with over 100 pages via eDAS (Pharos Blueprint)

What you will see

When printing a job with over 100 pages, you may experience any of the following symptoms:

  • Screen stays at “Verifying” or “Validating” upon authentication.
  • Control panel displays a 900.36firmware error.
  • Printer display returns to the home screen.

Affected products

This issue has been seen on the following Lexmark models (i.e., dhe/de/e variants) with embedded Document Accounting Solution (eDAS) app version 3.1.0 or below:

  • CS510
  • MS610
  • MS810
  • MS812
  • MS911
  • CX410
  • CX510
  • MX410
  • MX51x
  • MX61x
  • MX6500
  • MX71x
  • MX81x
  • MX91x

An x denotes any number within a given printer model series.

Recommended solution

To resolve this issue, update the eDAS app to PE release version

To obtain this version, please contact your next level of support or Lexmark Technical Support and reference this article ID. Support personnel can assist with the update procedure if necessary.


The firmware user interface (UI) could not cope with the data load while trying to display a large number of jobs.

Still need help?

If you need additional assistance, please close this window, go to your product's support page and locate

Get In Touch with Lexmark! for contact information.
In order to expedite the support process, please be prepared to provide information regarding your issue, e.g., name and version of solution, problem description, and affected printer models.

Additional information may be requested by the support agent.


Was this article helpful?