What you will see
A solid-vertical line prints down the entire left-hand side of the page.
NOTE: The distance from the edge of the page can be variable on a case-to-case basis.
Suggested fix
Ensure that the corona wire* cleaner is inserted fully as shown in the image below.
To do this:
Open the printer’s bottom-front door.
Look for the white flag or tab.
Pull the tab out slightly, and then push the tab back in until it stops.
Close door and test.
Click Image to Enlarge |
|
Push the corona wire* cleaner in the direction pointed to by the red arrow and make sure that it is seated properly. |
* The corona wire is a component of the charger or charge roller assembly.
Video
Please note that you will need QuickTime to view the video. You can download QuickTime.
The file is approximately 23MB; please allow time for the movie to load.
Explanation
The printer is not able to detect the incomplete insertion of this corona wire* cleaner, hence the front door can be closed without any apparent error and this print anamoly results.
Contacting Lexmark
If you require additional assistance, please close this window and locate
Get In Touch with Lexmark! for contact information.
NOTE: When calling for support, you will need your printer model/machine type and serial number (SN). If you need help locating these, Serial Number, Machine Type, and Configuration ID Location for the Lexmark MS, MX, XM, CS, CX, XC, 91X - 92x Series Printers and MFPs.Please be near the products described in this article to expedite the support process and reduce callbacks.
LEGACY ID: SO7570