Skip to Content Information Center
Lexmark XC8160

Lexmark XC8160

Lexmark CX825, CX860, and XC81xx:How to Change Date and Time & NTP Server

Affected Products:

Multifunction: CX825, CX860, XC8155, XC8160, XC8163

Overview:

This document shows you how to change the Date and Time & Network Time Protocol (NTP) server.

The following reasons have been cited on why the following settings must be changed or updated.

  • The current date is invalid.

  • Date skew and the time difference from the server is too large.

  • When printer is reset to factory default, you need to recheck the date and time settings if it is correct.

  • Technician needs to activate or deactivate NTP.

  • The NTP settings need to be accessed.

Solution:

  1. Open any browser and type the printer's IP Address and press Enter key on the keyboard to access the printer's embedded web server (EWS).

  2. Go to Settings > Device > Date and Time.

  3. Under Date and Time, the following settings will appear that can be configured and updated.

Date and Time Settings:

Configure OptionsDate and Time Settings

(A) Manually Set Date and Time

- You can manually type the date and time using this format MM-DD-YYYYhh:mm where M is month, D is day, Y is year, h is hour and m is minute.

- When clicked, a date picker will appear and you can choose which date to set.

(B) Date Format

- Option to change the Date format - There are three options when clicked, the default one MM-DD-YYYY, second option is DD-MM-YYYY, and last option is YYYY-MM-DD.

(C) Time Format

- Option to change the Time format - The available options to choose from are 12 hour A.M./P.M. or 24 hour clock.

(D) Time Zone

- Option to change the Time zone - All time zones are listed when clicked on a drop-down menu box.

Network Time Protocol Options

(E) Enable NTP

- You can place a check mark on this to activate or uncheck the box to deactivate.

(F) NTP Server

- You can place the IP address of your NTP Server in this field.

(G) Enable Authentication

- The available options you can choose from are NONE or MD5.

Still Need Help?

Have the following available when calling Lexmark Technical Support;

  • Printer model(s)

  • Printer serial number

LEGACY ID: HO4046

¿Este artículo ha sido útil?
Top