Single function: CS72x, CX72x, CS82x, MS521, MS621, MS622e, MS82x, MS82xe,
Multifunction: CX820, CX825, CX860, CS92x, CX92x, MX321, MX421, MX521, MX622, MX72x, MX82x
The print jobs sent to a brand new or out-of-the-box printer with IPDS card are not printed.
Enable TCP 5001 after going through the Initial Set-up Wizard in setting up a brand new or out-of-the-box printer.
> Network/Ports > TCP/IP >
TCP/IP Port Access
> then select TCP 5001.
Proceed to the usual steps for the printer IPDS set-up. Follow the instructions from the
Card for IPDS and IPDS Printer and Host Setup Guide
Note: When a “Restore to Factory Default” is performed on the printer, the TCP/IP port settings revert to default. In this case, please enable back TCP 5001 to print IPDS.
Still Need Help?
Have the following available when calling Lexmark Technical Support;
Printer serial number
Screenshot of the TCP/IP port access found under Settings > Network/Ports > TCP/IP
Printer's Menu Settings Page
Screenshot of the host settings
LEGACY ID: SO8865