Skip to Content Information Center
Lexmark XC8155

Lexmark XC8155

Lexmark CS820 & CX82x ? Excess Toner (Dust) Can Be Found Inside the Printer

What you will see

You may notice toner dust inside the printer whenever you replace its supplies, or a slight film of excess toner on some surfaces of the Photoconductor (PC) Unit, Developer Unit, and/or Image Transfer Unit. This "dusting" is normal and will not affect the printer's performance.

Click Image to Enlarge
Circled inredare samples of magenta and yellow toner dust as seen on top of their Imaging Units. This scenario is not uncommon.

However, should the level of dusting become prohibitive, please contact Lexmark Technical Support.

Contacting Lexmark

If you require additional assistance, please close this window and locate

Get In Touch with Lexmark! for contact information.
NOTE:
When calling for support, you will need your Lexmark C/XC61xx, CS/X8xx, and XC81xx: How to Locate the Serial Number, TLI, and Machine Typemodel/machine type and serial number (SN), as well as the Lexmark CX/CS8xx and XC/Cxxxx: How to Locate the Printer Supplies Serial Numbers and Part Numberspart number and serial number.

Please be near the products described in this article to expedite the support process and reduce callbacks.

LEGACY ID: SO7818

Was this article helpful?
Top