Skip to Content Information Center
Lexmark CX825

Lexmark CX/CS8xx and XC/Cxxxx: A `58 Output Config Error? or `Check Finisher Installation? Error Message Appears on a Printer with Inline Stapler Option Installed

Affected Products:

Single-Function: CS820, CS827 and C6160

Multifunction: CX820, CX825, CX827, CX860, XC6152, XC6153, XC8155, XC8160 and XC8163

Issue Description:

The printer displays one of the following error messages:

  • "58 Output Config Error" (Printers having an earlier firmware version)

  • "Check Finisher Installation" (Printers having firmware 3 or higher versions)

Possible Cause:

A damaged or missing bin full flag, produced when a staple finisher optionis installed on the printer, causes this error to appear.


Make sure the two alignment pins


for the staple option are lined up with the holes


above the printer exit to avoid damaging the bin full flag.

Still Need Help?

Have the following available when calling Lexmark Technical Support;

  • Printer model(s)

  • Printer serial number