Skip to Content Information Center
Lexmark CX827

Lexmark CX827

How to Locate the Serial Number for a Multi-Position Staple Hole Punch Finisher


When contacting Lexmark Technical Support or arranging warranty service, you will need to know your printer's machine (model) type and serial number. This article explains how to find the serial number for a Multi-position staple hole punch finisher.

Locating the label

StepActionClick Image to Enlarge
1 You can find the Multi-position staple hole punch finisher serial number in different locations.

To find these locations, match their corresponding letters below to the red-boxed outlines in the right-hand image.

(Additional details are also provided below.)


– The label is located immediately above the Multi-position staple hole punch finisher, just beside Door C.


– Open Door L from the Mailbox option. The label is located on top of the Mailbox diverter.


– Open Door J. The label is located in the top right corner.


– While Door J is open, locate the other label in the lower right corner as shown in the image.

Still need help?

If you require additional assistance, please close this window and locate

Get In Touch with Lexmark! for contact information.
When calling for support, you will need your printer model/machine type and serial number (SN).

Please be near the products described in this article to expedite the support process and reduce callbacks.


Was this article helpful?