Skip to Content Information Center
Lexmark CX820

Lexmark CX820

How to Add or Enable Card Copy Icon for PaperCut-Enabled Devices

Overview

This issue only happened on the devices listed below that had the PaperCut Application installed:

  • Lexmark CX860
  • Lexmark CX825
  • Lexmark CX820
  • Lexmark CX725
  • Lexmark CX827
  • Lexmark CX727

Resolution

By default, the Card Copy Application will be locked or disabled if a PaperCut Application is installed on these devices. The steps below will show how to add the Card Copy Application on these devices having the PaperCut Application installed.

StepActionImage
1Admin needs to log in to the PaperCut server and access one of the devices on the list.
2After selecting the device, Admin needs to add the esf.cardCopy.cardCopyFAC and select 'Update'. Wait for the update to complete the installation.

Contacting Lexmark

If you need additional assistance, please go to the Lexmark support site, type your printer mode; and locate

Get in Touch with Lexmark! for contact information.
NOTE:
When calling for support, you will need the following:

  • Name and version of the solution
  • Affected printer model/s
  • Printer serial number

Please be near the product/s described in this article to expedite the support process and reduce callbacks.

LEGACY ID: SO8482

Was this article helpful?
Top