What you will see
You may notice toner dust inside the printer whenever you replace its supplies, or a slight film of excess toner on some surfaces of the Photoconductor (PC) Unit, Developer Unit, and/or Image Transfer Unit. This "dusting" is normal and will not affect the printer's performance.
|Click Image to Enlarge|
|Circled inredare samples of magenta and yellow toner dust as seen on top of their Imaging Units. This scenario is not uncommon.|
However, should the level of dusting become prohibitive, please contact Lexmark Technical Support.
If you require additional assistance, please close this window and locate Get In Touch with Lexmark! for contact information.
NOTE: When calling for support, you will need your Locating the Serial Number, TLI, and Machine Typemodel/machine type and serial number (SN), as well as the Lexmark CX/CS8xx and XC/Cxxxx: How to Locate the Printer Supplies Serial Numbers and Part Numberspart number and serial number.
Please be near the products described in this article to expedite the support process and reduce callbacks.
LEGACY ID: SO7818