Skip to Content Information Center
Lexmark M3150

Lexmark M3150

Change in Internet Printing Protocol (IPP) Endpoint to Certify EC 6.x RIP Firmware of the 2012 Generation of Lexmark Printers

Overview

In order for the EC 6.x RIP firmware releases for the 2012 generation of Lexmark printers to be certified for the most recent version of Airprint, Apple requires the IPP endpoint to be changed from http://<ip address>/ipp to http://<ipaddress>/ipp/print.

Thus, the EC 6.x RIP firmware releases are functioning as redesigned. But in order to avoid any certification issues, you have to use the new IPP endpoint. This document outlines the steps to do this.

Procedure

  1. Click “Start”.

  2. Select "Device and Printers".

  3. Select "Add a printer".

  4. Select "Add a network, wireless or Bluetooth printer".

  5. Select “The printer that I want isn’t listed”.

  6. Click "Select a shared printer by name".

  7. Enter http://<ipaddress>/ipp/print (Example: http://192.168.0.13/ipp/print)

  8. Select “Next” and follow the rest of the procedure.

Still need help?

If you require additional assistance, please close this window and locate

Get In Touch with Lexmark! for contact information.
NOTE:
When calling for support, you will need your printer model/machine type and serial number (SN).

Please be near the products described in this article to expedite the support process and reduce callbacks.

LEGACY ID: SO8221

Was this article helpful?
Top