What you will see
Double Byte Character Set (DBCS) fonts are missing or may not be printed properly. This is prevalent with MS410d and MS410dn printer models that are running EC3 firmware (LW30.PRL.P328).
How to confirm missing fonts
A clear indication that the fonts are missing occurs when these fonts do not appear on the print out when you print a Menu Settings page. The images below show sample Menu Settings pages from printers both with and without DBCS fonts.
NOTE: To print the Menu Settings pages, navigate through: Menu
> Reports > Menu Settings.| Click Images to Enlarge |
| |
| Printout of Menu Settings page without DBCS fonts | Printout of Menu Settings page with DBCS fonts |
Suggested Remedy
To correct the missing DBCS issue, click the link to download the LW30.PRL.P328.updfonts.zip firmware and then proceed with any of the options below to perform the update to your printer.
| Firmware Flash Methods | Information |
| Embedded Web Server (EWS) Recommended | Open a browser and enter the IP address of the printer. Select Settings >Update Firmware. |
| USB utility | for the detailed steps. |
| USB thumb drive | for the detailed steps. |
| FTP | for the detailed steps. |
| Printer File Loader (USB-Macintosh) | for the detailed steps. |
NOTE: Should issue persist or if you are having difficulties performing the update, please contact Lexmark Technical Support.
Contacting Lexmark
If you require additional assistance, please close this window and locate Get In Touch with Lexmark! for contact information.
NOTE: When calling for support, you will need your printer model/machine type and serial number (SN). If you need help locating these
Please be near the products described in this article to expedite the support process and reduce callbacks.
LEGACY ID: TE612