Skip to Content Information Center
Lexmark MS610dn / MS610dtn

Lexmark MS610dn / MS610dtn

Tip to improve the stability of an adjustable printer stand


If the printer appears to be unstable using the Adjustable printer stand (Part Number: 35S8502), the two (2) black latches must be removed to render the machine steady.

NOTE: The latches are not needed for a “printer only” installation; i.e., no other media options will be installed in the machine.

How to remove the latches

The diagram here shows the location of the latches (A); these can be removed by unscrewing the two screws (B) using the Philips screwdriver provided with the stand.

If you are having difficulties removing the screws or if you have other issues with the printer or the furniture, please contact Lexmark Technical Support.

Still need help?

Please contact Lexmark Technical Support if you need additional assistance. NOTE: When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating these, click: How to Locate the Serial Number, TLI, Config ID, and Machine Type on a Lexmark CS310, CS410, CS510, CX310, CX410, and CX510 Printers.

Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.


¿Este artículo ha sido útil?