What you will see
Paper exits at the output bin with "dog-ears" (see images below) at either the left or right-hand corner of the leading edge. As the sheets pile-up at the output bin, before the bin is filled, the leading edge of succeeding sheets catch the folded corners of the dog-eared media, which produces jams. Unless you empty this tangled media stack at the output bin, successive jams will occur.
NOTE:16lbs-LT, 60g-A4, A5, Statement, and Executive media are more like to experience this issue.
|Click Images to Enlarge|
|Dog-ears are often big, not hard- folded, and usually occur when paper curl is excessive, as shown above.||Example of a dog-ear on a sheet's right-hand corner, before the puncher activated.|
This issue is more prevalent on curled and lightweight media.
NOTE: The printer does not possess settings that can be adjusted to avoid this occurrence. What you can do to reduce the effect of curling is to use media that is dry and fresh out of a ream. If the sheets have been sitting in the tray for quite some time, flip the stack over in the tray before printing from it.
How to remove the paper jam
Should paper jam occur, follow the directions below in order to locate and remove the jammed pages and resume printing.
|Step||Action||Click Images to Enlarge|
|1||Should the jam occur inside the HPU, the most effective way of removing the jammed sheet is by using the Jam wheel. To find this wheel, you need to open the rear door of the HPU. See the right-side image.||Figure 1|
Check the fuser area, if you are unable to find the jammed sheet inside the HPU.
a. Pull down the rear door.
b. Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
|Figure 2aFigure 2b|
Still need help?
Please contact Lexmark Technical Support if you need additional assistance.
NOTE: When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating these, xref_HO3865_xref.
Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.
LEGACY ID: SO7491