Skip to Content Information Center
Lexmark CS510

Lexmark CS510

Tip to Improve the Stability of an Adjustable Printer Stand

Overview

If the printer appears to be unstable using the Adjustable printer stand (Part Number: 35S8502), the two (2) black latches must be removed to render the machine steady.


NOTE:
The latches are not needed for a “printer only” installation; i.e., no other media options will be installed in the machine.

How to remove the latches

The diagram below shows the location of the latches (A); these can be removed by unscrewing the two screws (B) using the Philips screwdriver provided with the stand.

Click Image to Enlarge
Remove the screws (B) to unfasten the latches (A).

If you are having difficulties removing the screws or if you have other issues with the printer or the furniture, please contact Lexmark Technical Support.

Still need help?

Please contact Lexmark Technical Support if you need additional assistance.
NOTE:
When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating these, click: xref_HO3864_xref or How to Locate the Serial Number, TLI, Config ID, and Machine Type on a Lexmark CS310, CS410, CS510, CX310, CX410, and CX510 Printers.

Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.

LEGACY ID: HO3885

Was this article helpful?
Top