Skip to Content Information Center
Lexmark CS510

Lexmark CS510

Smart Card Reader Driver and Firmware Requirements


This article lists the supported smart card reader for the Lexmark printers.

Identive Cloud 2700 Smart Card Reader

The new Identive Cloud 2700 smart card reader requires card driver version 1.3.1 (or higher) and at least an EC3 firmware level.

See xref_Check_xref to view steps to verify your printer’s firmware code level.

Here is the list of printers that support Identive Cloud 2700:


MS610, MS810, MS812, MS911, MX410, MX51x, MX61x, MX6500, MX71x, MX81x, MX91x

Color:CS510, CX510

An x denotes any number within a given printer model series.

<< Back to top >>

SCR331 USB Smart Card Reader

The SCR331 USB smart card reader is supported on all Lexmark printer models.

<< Back to top >>

Part numbers

Use the appropriate part number below when replacing card reader:

  • 40X9879 – Identive Cloud 2700F reader
  • 40X6963 – SCR 331
  • 40X8737 – OmniKey 5427 CK

<< Back to top >>

Still need help?

If you need additional assistance, please close this window, go to your product's support page and locate

Get In Touch with Lexmark! for contact information.
In order to expedite the support process, please be prepared to provide information regarding your issue, e.g., name and version of solution, problem description, and affected printer models.

Additional information may be requested by the support agent.


Was this article helpful?