Overview
When printing from one of the paper input options (i.e., Tray 2, Tray 3, etc.), the printer displays a '24x. 01' type paper jam message on the operator panel (where 'x' can be any number; i.e., 242.01, 243.01, etc.). The paper stops shortly after feeding out from one of the paper trays.
NOTE: Select the Show areas feature on the control panel to view images that will help you locate and clear the jam. Once the paper path is completely cleared of all jammed paper/media, the printer should resume normal printing.
Understanding jam numbers and locations
When a '24x.01' jam occurs, a message indicating the jam's location appears on the display. The associated numeric error code is normally one of the following: 242.01 or 243.01.
The following table lists the '24x.01' paper jams that can occur, and the location of each jam:
Jam Numbers | Area | Click Image to Enlarge |
242.01 (1) | Optional Input Tray | See image here. |
243.01 (2) | Optional Input Tray |
NOTE: Optional Input Tray can be a 550 Sheet Input Options or a 650 Sheet Input Options.
Troubleshooting
Steps | Actions |
1 | Try to locate and remove the jammed paper. Be sure any previous jams have been completely removed. Note: If this print job consisted of more than one page, probably more than one page is stuck inside the printer. Follow all the steps in the link above and confirm that the entire paper path is clear before attempting to print again. |
2 | Be sure that the paper of the affected paper tray (could be any input source) is loaded correctly and not overloaded. |
3 | Check if the paper level flag is in its proper place, moving freely, and falls to the slot on the tray. See picture below. See image here. |
4 | If issue persists after performing the steps mentioned above, there may be an issue within the machine's hardware. Please contact Lexmark Technical Support for other troubleshooting suggestions. |
Contacting Lexmark
Please contact Lexmark Technical Support if you need additional assistance. NOTE: When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating your printer's model type and serial number, How to Locate the Serial Number, TLI, Config ID, and Machine Type on a Lexmark CS310, CS410, CS510, CX310, CX410, and CX510.
Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.
LEGACY ID: SO7161
Audience: 'LEXMARK PARTNER' only below
- Be sure to clear all obvious paper jams from the entire paper path.
- Fan the media and check for obstructions, damaged media, and verify the proper tray settings for the media.
- Please ensure that all of the paper trays are fully inserted into the printer.
NOTE: If necessary, refer to the Service Manual for more detailed diagnostic information as well as for FRU removal procedures.