Skip to Content Information Center
Lexmark C748

Lexmark C748

Lexmark Printer Management Agent for MPS issues primary escalation requirements

Index

Back to index

Common requirements

Before proceeding, make sure to fill out the Main escalation information requirement.

If a device is involved, gather these common requirements for all Lexmark Printer Management Agent for MPS-related issues.

Please utilize all available technical support resources before electing to escalate issues.

    Requirement and relevanceHow to obtain

    To verify printer communication

    Perform a test print.

    Verify whether the LPMA service is running on the client computer

    This is required for the app to work.

    1. Go to Start, type services, and then click Services to open the window.

    2. Locate and make sure that the Lexmark Printer Management Agent service is started.

    Verify whether LPMA data is available

    To verify missing data in the Lexmark Data Collection Manager (LDCM) when data is not collected

    Make sure that MPSConfiguration.ini file has MPS_STATUS] ¬ RUN_ON_STARTUP=ENABLED, and then restart the LPMA service to trigger file generation.

    Verify whether the webserver url https://<server name or IP address>:8443/localagent/localagent.jsp is reachable from the client computer and results in a Connection Successful message.

    Note:  If connection is not successful, make sure that the server's outbound port 8443 is open and is not blocked by any Firewall, Router, or Proxy server.

    Collect MPSLOGGER.log

    Info is used for simulation and analysis.

    1. Make sure that MPSConfiguration.ini file has MPS_STATUS] ¬ LOGGING_LEVEL=ALL LOG_FILE_NAME=C:\Users\<username>\Desktop\lpmalogs\MPS.log, and then restart the LPMA service to trigger file generation.

    2. Print multiple files to the printer.

    3. Collect the MPSLOGGER.log file (or the set LOG_FILE_NAME) found in the C:\ProgramData\LPMA or C:\Documents and Settings\All Users\LPMA folder.

      Note:  It will indicate the function and whether the data is successfully sent to LDCM web server. Additionally, if MPS logging is set to “ALL”, an XML file will appear in the folder and should contain printer information (if printer communication is working).

    4. Provide the LOG file to Lexmark Technical Support.

Back to index

LEGACY ID: FA1069

Was this article helpful?
Top