Skip to Content Information Center
Lexmark C950

Lexmark C950

Lexmark 'Eco Settings' Solution v3.5.2 Readme

Lexmark 'Eco Settings'


v3.5.2 (6/11)


This Readme file pertains to the current release of the LEXMARK ECO-SETTINGS application.

Lexmark Eco-Settings is an embedded solution that can be installed on printers that support the Lexmark Embedded Solutions Framework (eSF) v2.0 or v3.0. Eco-Settings enables users to use their printer touch screen to easily view and manage print settings that reduce energy consumption, noise, and toner and paper use.


  1. Any single or multifunction printer that supports eSF v2.0, and v3.0 applications.

Supported eSF v2.0 devicesMinimum Firmware Level Requirement (or later)
X651de, X652de, X654de, X656de and X658de Supported eSF v2.0 MFPs include:LR.MN.P128
X734de, X736de and X738deLR.FL.P103
X463de, X464de, X466de, X466dte, X466dweLR.BS.P072
X860de, X862de, X862dte, X864de, X864dhe, XS860de, XS862de and XS864deLP.SP.P108

Supported eSF v3.0 devices

C792 (SFP)LHS1.HC.P129
X548de, X548dte and XS548deLHS1.VK.P141i
X792, X792e, X792de, x792dte, x792dtfe, x792dtpe, x792dtme, x792dtse, XS796de and XS796dteLHS1.MR.P135k
X925, X925de and XS925deLHS1.HK.P136k
X950de, X952de, X952dte, X954de, X954dhe and XS955dheLHS1.TQ.P145h
6500e Scanner-equipped printersLJR.JR.P169

The application is installed on supported Single Function Printers (SFPs) by default.

  1. MFP device memory requirements: A minimum of 256 MB RAM.

  2. Single function printers (SFPs): A minimum of 256 MB RAM.

  3. This application requires an electronic license to run on eSF v3.0 printers. To obtain a license, go to and click the "Contact Lexmark" link at the bottom of the screen.

Package Contents

The following files and publications are included in Eco-Settings v3.5.2.

  1. ecoPrint-2.0.0.fls - Eco-Settings application for eSF v2.0 MFPs.

  2. ecoPrint-3.5.2.fls - Eco-Settings application for eSF v3.0 MFPs

  3. Administrator_Guide.pdf - Administrator's Guide

  4. Readme.txt (this file)

New Features

eSF 3.0 Device Support.

Limitations and compatibility of the release

  1. If a setting is changed and applied from the printer's configuration Web page, the page always displays a "Modified settings were committed successfully" message, regardless of whether the changes were actually applied on the printer. To find out if the settings were applied successfully, the administrator can refresh the screen.

  2. Some settings such as Power Saver and Standby Mode cannot be changed While the printer is printing or is in an error state.

  3. For eSF v3.0 printers, the application cannot be configured using MarkVision Professional (MVP).

Installation details

For further installation and configuration instructions, please see the Lexmark 'Eco Settings' Administrator's Guide (AdminGuide.pdf) provided with the application. Adobe Acrobat Reader is required to view this guide.adf


Was this article helpful?