Skip to Content Information Center
Lexmark T656

Lexmark T656

How to Set LDD to discover IP addresses Ending in .0 and .255

Overview

This article details the steps required to make sure that x.x.x .0 and x.x.x .255 IP addresses are discoverable in the Lexmark Document Distributor ( LDD).

Find this setting on the Lexmark Management Console ( LMC) > Device Groups tab> select [Group] > Discovery Profiles.

Supported products

See supported printers list found on Lexmark Document Distributor Administrator's Guide.

Procedure

Perform the following steps:

StepAction
1 On the Load Balancer server, go to C:\Program Files\Lexmark\Solutions\apps\wf-ldss\WEB-INF\classes, and then open server.properties.
2 Locate the server.subnetMask entry, and then update the value to match the subnet mask of the IP addresses (e.g., subnet mask 255.255.252.0 for a 10.84.9 .0 or 10.84.8 .255 IP address).
3 Go to Start, type Services, double-click Services to open, and then and restart the Lexmark Solutions Application Server service.

Explanation

The server.properties file’s default configuration uses a class C network with a 255.255.255.0 subnet mask.

Still need help?

If you need additional assistance, please close this window, go to your product's support page and locate

Get In Touch with Lexmark! for contact information.
NOTE:
In order to expedite the support process, please be prepared to provide information regarding your issue, e.g., name and version of solution, problem description, and affected printer models.

The support agent may request additional information.

LEGACY ID: HO3997

Was this article helpful?
Top