Skip to Content Information Center
Lexmark T656

Lexmark T656

A '202.12' Paper Jam Error is Displayed When Printing on Both Sides of the Page on a Lexmark T65x or X65x Series Printer

What you will see

When printing on both the front and back sides of the page, one of the following issues occur.

    1. Paper jams in the internal duplex assembly of the printer and a 202.12 Paper Jam message is displayed on the screen.

    2. The paper feeds through correctly. However, there are one or more creases in the paper.

In each case above, the issue occurs only when printing on both the front and back sides of the page (duplex printing). Single-sided pages print fine.

Check the position of two small cork pads

There are two small cork pads attached to a metal plate in the duplex assembly of the printer. If one of these pads slip, it can obstruct the paper path and cause the issues listed above. To check the pads, follow the steps in the table below.

T650 model printers do not have an internal duplex assembly, as shown in the table below. For T650 models to have duplex capability, a duplex option must be installed. xref_SO4124_xref for directions on how to locate and clear the paper jam on a T650 model.

1Power off the printer and remove the top paper tray (Tray 1).

Go around to the back of the printer and open the lower-rear access cover.

Remove any jammed paper that you find.


Look for a green tab along the right-hand side.

Press down on this tab to lower a large metal guide.

Remove any jammed paper that you find behind this guide.

For larger image, click here.
4Look for two small cork pads glued onto the guide, one located on the left-hand side and one located on the right-hand side.
For larger image, click here.

Once you have located each pad, confirm that it is in the proper location. If either pad has slid down, remove the pad and try to reposition it back into its original location.

If you have had to reposition the pad before and it continues to slip, try removing the pad entirely and continue with the steps below.

Click on the links below to view larger, close-up images of the pads in their proper location.

Left-hand side pad

Right-hand side pad

6Once you have returned the pad to its the correct position, check the remaining areas of the printer for any other sheets of paper that may still be jammed inside.
7Once you have confirmed that the entire paper path inside the printer is clear, close all covers and reinstall the paper tray.
8Try printing again. If the problem continues, check the pads again. If the pad has slipped again, remove it. Confirm the paper path is clear and try printing again.

If the problem continues and the pads are in the correct location or if you have removed the problematic pad, check the following:

  • Are you printing on regular plain bond copy paper? If not, try printing again with plain copy paper. This will eliminate specialty media as part of the cause of the jamming. Certain specialty paper, label stock, and card stock, are more difficult for the printer to feed and therefore more prone to jamming.
    For more information on this, please refer to the printer's User's Guide.
  • If you are printing on both sides of the paper (front and back), try printing single-sided pages. If single-sided pages print properly, check the duplex area of the printer again for any small pieces of paper or other obstructions.
  • If the problem continues after trying all the suggestions above, the printer may require a service action to correct the issue. Please contact Lexmark Technical Support for additional information (see below for details).

Contacting Lexmark

If you have questions on any of the steps above, or if you need assistance setting up warranty service, please contact Lexmark Technical Support.

When contacting Lexmark for assistance with your printer, please be prepared to describe the problem you are experiencing and any troubleshooting steps already taken. You will also need to know the printer's model/machine type and serial number (SN). This information can be found on labels located under the upper front cover and on the back of the machine. xref_HO3428_xreffor further details.


When calling Lexmark Technical Support, please call from near the printer in case the technician on the phone asks you to perform a troubleshooting task on the printer.


Was this article helpful?