|Bulletin# T65_102||Problem Description|
4062, 7462 - all
The printer displays a920.06 or other fuser related failure message after repair service is performed on the printer.
The LVPS connector on theSystem Card may be damaged.
|Old Parts Status||n/a|
|Serial No. Range||All|
LEGACY ID: TE280
What you will see
The printer displays a '920.xx' Service Fuser error (where 'x' can be any number). Examples of this error include: 920.06, 920.12, and 920.40.
What the error means
A 920 type error indicates that the printer registers the fuser unit (the internal heating element) as not having reached its proper operating temperature.
| 1|| If this is the first time a Service Fuser error has appeared on the printer, power it off. Wait ten seconds, and then power the printer on again. The printer should come up to the Ready state. If it does, try printing again.|
- If the fuser error does not return after you have printed a few pages, continue using the printer as normal. Pay close attention to the printer over the next few days, however, to see if the fuser error returns.
- Continue with the suggestions below if the fuser error returns on power-up or within the next few days, or if you have already tried powering the printer off and on.
| 2|| Confirm the printer is located in an operating environment where the temperature is above 16°C (60°F). In addition, confirm that the printer is not exposed to any cold breezes, such as being positioned next to an exit door or a window on cold days, or if it sits in the direct air flow path of a vent when the air conditioning is operating.|
| 3|| Check to see that the printer's power cord is plugged directly into a wall outlet and not connected to a surge device, power strip, or an outlet located in temporary cubical furniture. This is especially important if the fuser errors occur intermittently. If the printer is connected through one of these devices, try plugging it directly into a wall outlet. Verify whether the printer works on a |
220 volts source by checking its Power Label on its back and ensure that the power outlet matches its working voltage rating.
NOTE: Please carry out this test even if the printer has worked properly at its power outlet in the past. Power strips and uninterrupted power supplies can cause a low amperage condition to occur within in the printer, which can trigger a false fuser error.
|4|| If none of these suggestions clear the fuser error permanently, the printer may require a service action to correct the issue. Please contact Lexmark Technical Support or a local authorized service provider for additional assistance. For information on contacting Lexmark Technical Support, click here.|
Still need help?
Please contact Lexmark Technical Support if you need additional assistance.
NOTE: When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating these, xref_HO3428_xref.
Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.
LEGACY ID: TE280