Skip to Content Information Center
Lexmark T650

Lexmark T650

Lexmark T65x&X65x: 924.00 Error ? Open Fuser Thermistor Check

What you will see

After you remove a paper jam, the printer posts a 924.00 Error.

Possible cause

The Fuser is not properly connected to the printer. This most likely happens if the Fuser was removed in order to clear a paper jam.


  1. Power off the printer.

  2. If the error code appeared in the process of clearing a paper jam, first clear any jammed paper. Otherwise, proceed with the next step.

  3. Re-install the fuser and listen for two clicks to ensure that it is seated properly.

  4. Power the printer back on and verify whether the error clears.

  5. If the error persists, contact Lexmark Technical Support to set up service for the printer.

Still need help?

Please contact Lexmark Technical Support if you need additional assistance.
When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating these

Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.


Was this article helpful?