Skip to Content Information Center
Lexmark TS650

Lexmark TS650

Parallel port option card communication issues and suggested remedies (July 2014)

Possible problem scenarios



Affected Products

Scenario 1

  • You see a "54 Parallel Card" option card error appearing on the control panel...
  • Your current printer firmware level is at .P413a or below...
  • The printer port option card fails to be recognized...
  • USB flash drives or thumb drives fail to be recognized...

Remedy 1 below

E46x series, T650 and T652, T654, C73x series, W85x series


X46xe series, X654 series, X73xe series, X86x series

Scenario 2

  • You cannot print...
  • In addition to Standard Parallel, you see Light Parallel Interface Card under Device Information*...
  • Parallel code is at .P311e or below...

Remedy 2 below

All products compatible with the Parallel Option Card PN# 14F0000.

Note:  This mostly affects MS, MX, CX, or XC Series Lexmark products with printer firmware level .P358 or above.

*Embedded Web Server (EWS) > Reports > Device Information, or the same location on a printed Menus Settings page.)


Remedy 1

  1. Determine whether the printer's current firmware level is lower (<) than .P413c.

  2. If so, update the printer's firmware. Return to your printer's product page to locate and download the latest firmware package.

  3. After downloading the zip file, extract its contents to a destination folder and then select your update method.

Firmware download package contents usually include:

  • .fls file required for non-Windows environments or non-standard connection methods
  • Firmware Update Utility package to guide users through the firmware update process in Microsoft™ Windows operating system environment
  • Additional Release Notes
  • Printer File Downloader for Macintosh environments
  • Note:  Look for the presence of any downloadable language emulators (DLEs). Click here for an example illustration. Contact Lexmark technical support if you see the presence of any IPDS, forms and a bar code cards, Prescribe, PrintCryption, or other types of DLE option cards.

Remedy 2

Contact Lexmark Technical Support for further instructions. It is possible that you may receive a replacement card if a firmware upgrade option is not available.

Checking firmware levels

Obtain the Menu Settings page or access the printer's embedded web server (EWS) for this purpose.

To do this from the printer's operator panel:

  1. Press the Menu button on the Operator Panel.

  2. Select Reports.

  3. Select Menu Settings Page to start printing.

  4. Look for the code level under “Device Information” and next to Base and Engine.

To do this from the printers embedded web server (EWS):

  1. Launch your Internet browser application.

  2. After http://, enter the printers IP address.

  3. Click on Reports.

  4. Click on Device Information and locate the values next to Base and Engine.


Was this article helpful?