Skip to Content Information Center
Lexmark T650

Lexmark T650

Download Target Setting Is Reset After POR


What you will see

You are unable to permanently select DISK as download target. The Download Target setting in the Setup menu resets to RAM every time the printer is power cycled or set back to factory defaults

This setting does not apply to held print jobs.

Embedded Web server location: Settings > Print Settings > Setup Menu > Download Target


The default RAM value is stored in NVRAM*. The behavior is such that it avoids any unwanted or unexpected copying of resources (fonts, symbols, formsets, etc.) to flash or hard disk.

The download target setting only takes effect when changing to RAM from either FLASH or DISK to copy resources, e.g., fonts, symbols, formsets, macros etc.

A special product request would be required to change this default behavior.

* Non-volitile random access memory.

Still need help?

If you need additional assistance, please close this window, go to your product's support page and locate

Get In Touch with Lexmark! for contact information.

When calling for support, you will need to provide your printer model/machine type and serial number (SN). Please be near the products described in this article to expedite the support process and reduce call-back situations.


Was this article helpful?