You cannot authenticate on a printer’s control panel via Manual Login in order to release a Lexmark Print Management (LPM) print job. Card authentication works.
NOTE: This happens after the printer has been repaired (e,g., system board replacement).
See supported printers list found on the Lexmark Print Management Administrator’s Guide.
Perform the following steps:
Open the printer’s Embedded Web Server (EWS) using any web browsers (e.g., Internet Explorer, Google Chrome, Mozilla Firefox, etc.)
Note: See to view steps to access printer's EWS.
|2|| Go to Settings > Embedded Solutions or Device Solutions – Solutions (eSF) or Apps – Apps Management > Badge Authentication > Configure tab.|
Make sure Logon Method is set to Card or Manual Login, and then click Apply.
Note: Try to authenticate via Manual Login again. If the issue persists, proceed with next steps.
|4|| Open a web browser, and then go to http://<loadbalancer IP address>:9780/lmc to open the Lexmark Management Console (LMC).|
|5|| Go to the Device Groups tab > Discovered Devices, and then make sure that the printer’s IP address is on the list.|
|6|| Go to the Devicestab, search the printer’s IP address, click on Policy Update, uncheck “Only update those devices which are Out of Policy”, and then click on Update Policy.|
Still need help?
If you need additional assistance, please close this window, go to your product's support page and locate Get In Touch with Lexmark! for contact information.
NOTE: In order to expedite the support process, please be prepared to provide information regarding your issue, e.g., name and version of solution, problem description, and affected printer models.
The support agent may request additional information.
LEGACY ID: SO7755