W
hat you will see| If using... | With... | Then... |
| Smart card authentication (PKI Authentication) and LDD based PrintRelease. | A large number of plus 1500 devices. | A certain number of devices may not update their date and time via NTP, or you may see inconsistent results if manually rebooting a device. |
NOTE: For smart card authentication to work, the devices must have the clocks synchronized with the domain against which the users with the smart cards are authenticated.
Affected products
This issue was first seen on several X945 MFPs, however, it is possible this issue may be seen on printers with similar firmware architecture.
Preliminary checks
- Make sure the devices in question are configured to use NTP.
- Determine if NTP implementation on certain devices is different from other devices.
- Make sure these devices all have the same NTP server address.
Note: This address may be the address of one of the Windows AD domain controllers. This may even be the same domain controller the users are authenticating against with the smart cards. - Verify any network routing changes have may have taken place.
Suggested remedy
If all preliminary checks have been performed, then capture anetwork trace to locate NTP traffic generated and received by the device and escalate this issue to Lexmark Technical Support.
One instance was determined to be the 'Stratum' level reply from the NTP server which exceeded the Stratum' level that is expected. This resulted in a firmware change to our NTP implementation to only log a warning instead of an error.
Still need help?
If you need additional assistance, please close this window, go to your product's support page and locate
Get In Touch with Lexmark! for contact information.
NOTE: When calling for support, you will need to provide your printer model/machine type and serial number ( SN). Please be near the products described in this article to expedite the support process and reduce call-back situations.
LEGACY ID: SO7849