What you will see
| If... | Then... |
You scan to a folder using an existing file name with the following settings: - "Append time stamp" is disabled.
- "Over-write existing file" is disabled.
- "Allow user to enter file name" is enabled.
| The Scan to Network ( SNF) app version 4.8.5 does not prompt that the name already exists. Moreover, it will not proceed with the scan and goes back to the home screen. |
NOTE: The previous SNF app versions display this Scan failed prompt when scanning to a destination containing the same file name.
Recommended solution
Update the SNF app to PE release version 4.8.5.10 or higher.
To obtain this version, please contact your next level of support or Lexmark Technical Support and reference this article ID. Support personnel can assist with the update procedure if necessary.
Still need help?
If you need additional assistance, please close this window, go to your product's support page and locate
Get In Touch with Lexmark! for contact information. NOTE:
In order to expedite the support process, please be prepared to provide information regarding your issue, e.g., name and version of solution, problem description, and affected printer models. Additional information may be requested by the support agent.
LEGACY ID: SO7677