Skip to Content Information Center
Lexmark X950

Lexmark X950

Unable to Scan Using Any Network Twain-Compliant App when Shortcut Number Assigned Is 15, 18, 19, 20, or 22

What you will see

You cannot scan using any Network Twain-compliant application (e.g., Scan Center). The following symptom and error may occur:

  • After clicking Scan in the Network Twain window, it freezes and will not complete a scan.
  • Clicking the Scan button multiple times will result to a General Network error while trying to communicate with the device.


NOTE:
This happens when using Network Twain driver version 1.14 and below.

Recommended solution

Update the Network Twain driver to version 1.5 (or higher).

Explanation

When scanning using Network Twain driver, the printer firmware will randomly assign a shortcut number to the driver depending on the available shortcuts. However, with Network Twain driver version 1.14 and below, the driver will not recognize shortcut numbers 15, 18, 19, 20, and 22; thus, causing the issue.

Still need help?

If you need additional assistance, please close this window, go to your product's support page and locate

Get In Touch with Lexmark! for contact information.
NOTE:
When calling for support, you will need your printer model/machine type and serial number (SN).

Please be near the products described in this article to expedite the support process and reduce call-back situations.

LEGACY ID: SO7617

Was this article helpful?
Top