Skip to Content Information Center
Lexmark X950

Lexmark X950

Lexmark X95x MFP ? 843.05 and 900.58 Error Code

What you will see

  • Using the Auto Document Feeder (ADF) to copy, the machine will scan the first page and then post the 843.05 error code.
  • Using the flatbed scanner to copy, the scanner lamp only moves about two inches (five cm) when a scan is initiated, and then posts the 900.58 error code.

Troubleshooting

Clear the error by powering off the printer. Wait ten to 20 seconds before powering it back on. Run a test scan and see whether the error reappears.

  • If the error did not reappear after a couple of test scans, continue using the machine but observe its operation for a week. If no further sign of the error develops, it was probably a temporary glitch; restarting the machine cleared it.
  • If the error re-appears, contact Lexmark Technical Support to set up service for the printer.

Still need help?

Please contact Lexmark Technical Support if you need additional assistance.
NOTE:
When calling for support, you will be asked for your machine/model type and serial number (SN).

Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.

LEGACY ID: TE428

Was this article helpful?
Top