Skip to Content Information Center
Lexmark X954

Lexmark X954

843.05 and 900.58 Error Code

Issue description

  • Using the Auto Document Feeder (ADF) to copy, the machine will scan the first page and then post the 843.05 error code.
  • Using the flatbed scanner to copy, the scanner lamp only moves about two inches (five cm) when a scan is initiated, and then posts the 900.58 error code.


Clear the error by powering off the printer. Wait ten to 20 seconds before powering it back on. Run a test scan and see whether the error reappears.

  • If the error did not reappear after a couple of test scans, continue using the machine but observe its operation for a week. If no further sign of the error develops, it was probably a temporary glitch; restarting the machine cleared it.
  • If the error re-appears, contact Lexmark Technical Support to set up service for the printer.

If the issue persists, search for more information related to this issue or contact support for further assistance.


Was this article helpful?