Skip to Content Information Center
Lexmark X738

Lexmark X738

Not your product?

PJL Command to Prevent Deletion of Files on Forms and Bar Code Card Fails Due to Generational Differences in Firmware Architecture

What you will see

Product equipped with...Fails to protect data with this .pjl file...Reason

Forms and Barcode card or HDD option

@PJL DEFAULT LRESOURCE:"flash" LRWLOCK="password"

Missing colon (:) "flash" instead of "flash:"

Affected Products

  • MS, M, CX, XC, MX and XM products; i.e., MX811de
  • Forms and Barcode card or hard drive option
Suggested remedy

  1. Edit the .esc file to include an additional colon after the word flash.

  2. Resend the file to the printer, for example, LPR -S 192.168.1.13 -P print <Filename>.

Revised .esc file example

Explanation

JAR files that contain certain label text characters may get refused because of differing firmware architecture between product generations.

Still Need Help?

If you require additional assistance, please close this window, go to your product's support page and locate

Get In Touch with Lexmark! for contact information.
NOTE: When calling for support, you will need your printer model/machine type and serial number (SN).

Please be near the products described in this article to expedite the support process and reduce callbacks.

LEGACY ID: SO7535

Audience: Lexmark and Support Partners

Additional Information

Simulation scenario

See escalation ticket.

LEGACY ID: SO7535
Was this article helpful?


Related content

Top