Skip to Content Information Center
Lexmark X466

Lexmark X466

Trying to Use the 'Remote Copy Solution' Results in Flushing Buffer, Garbage Print or No Response on Remote Printer

What you will see

Flushing buffer or garbage print when attempting to use the Remote Copy solution software.

Affected Products

  • X64x Series MFPs
  • X65x Series MFPs
  • X73x Series MFPs
  • X78x Series MFPs
  • X86x Series MFPs
  • X94x Series MFPs

Anx denotes any number within a given product number series.

Suggested Remedy

Mac Binary PS should be enabled on the recipient printer or MFP in order for Remote Copy to work properly. You can choose to either set it to "On" or "Auto" as both will work.

To do this, two locations/methods exist to make this setting change.

Method 1: Embedded Web Server(EWS) via Settings(Configuration) > Network/Ports > Standard Network.

  1. Click on Settings.

  2. Click on Network/Ports.

  3. Clickon Scan to Network.

  4. Next to Mac Binary PS, click on the down-arrow to select Auto or On.

  5. Click Submit.

Method 2: MFP Control Panel viaMenus > Network/Ports / Standard Network.

  1. Press the Menus button in lower right-hand corner of control panel.

  2. Select Network/Ports.

  3. Select Standard Network.

  4. Scroll down until you see Mac Binary PS.

  5. Select Auto or On.

  6. Select Submit.

Click here

for screen shots of both locations.

Still Need Help?

Contact Lexmark Technical Support, or your 'Software Solution' provider if you require additional technical support. NOTE: You will be asked for your printer model/machine type and serial number (SN) when calling for support.

Please call from near the computer and printer in case the technician on the phone asks you to perform a task involving one of these devices.


Was this article helpful?