Overview
If you want to eliminate audible beeps or tones when control-panel buttons are pressed, consider the following topics.
- The "Button feedback" firmware level requirement
- Button feedback adjustment instructions via the printer's Web browser
- Button feedback adjustment instructions via the printer's control panel
"Button Feedback" firmware level requirement
Button feedback is only available on the MFPs that have a firmware-code level of (.P510) or higher.
The absence of this "setting" option will signal that you need to perform a firmware update.
To verify this firmware-code level, look at the value on the Menus Settings page under Device Information.
for more information on how to confirm or update firmware-code levels.
Web browser "Button Feedback" instructions
Perform the following to enable to disable audible control panel beeps.
Obtain your printer's IP address. This can also be found on your Menu's Settings page underthe Standard Network > TCP/IP heading.
Open your Web browser; e.g., Internet Explorer, Firefox, Chrome, Safari, or other browser.
Enter the printer's IP address, e.g., http://mfp_IP_address, where IP_address is the IP address obtained from your Menu's Settings page.
Click on Settings.
Click on General Settings.
Place or remove a checkmark next to Button feedback to enable or disable audible beeps.
Click Submit.
Click here for illustration.
Control Panel "Button Feedback" instructions
Press the Menus button.
Press Settings.
Press General Settings.
Press the down-arrow until you see Button Feedback.
Press the right or left-arrow buttons to toggle the setting (On or Off).
Press Submit.
Observe Submitting changes...
Click here for illustration.
Still Need Help?
Please contact Lexmark Technical Support for additional assistance.
NOTE: When calling for support, you will need to know your printer model type and serial number (SN).
Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.
LEGACY ID: HO3700