Skip to Content Information Center
Lexmark T644

Lexmark T644

How to initiate a Telnet session to a Lexmark print server


A Telnet session will allow you to configure the following IP settings:

  • DHCP
  • BootP
  • LPD timeout values
  • Restricted server list
  • Port configuration on external network adapters.


To initiate a Telnet session to the print server:

  1. Go to a command prompt and type the following:telnet (ip_address) 9000, replacing (ip_address) with the IP address of the print server.

  2. If the connection is successful, a list of options for configuring the adapter will be displayed.

  3. Use the on-screen menus to change the options.


Was this article helpful?