Power the printer off once more.
Check to see if there is a 2000-sheet feeder option connected to the printer. If there is, the option may be unplugged. Do the following:
Power off the printer.
Check the power cord going to the 2000-sheet feeder option. Make sure it is fully plugged into both the wall outlet and into the back of the feeder.
Once you have confirmed this, power on the printer and see if that clears the error.
Disconnect all of the communication/software cables going into the printer. Leave only the power cord connected to the printer.
Power the printer back on.
If the printer comes up to the ready state, reconnect the cables and try printing again. If the error returns as soon as you try to print, update the engine code on the printer. See Updating the Printer's Engine Code below.
If the error continues to occur on power up with no cables attached, the printer will most likely need to be serviced and the system card inside replaced. Please skip ahead to the Additional Assistance section at the end of this document.