What you will see
The printer’s control panel may have the following lights blinking: Ready, Tractor 2, Paper Out, Panel Lock. This LED combination may show as soon as the printer boots up, while it is in the middle of printing operation, or even when the printer is in an idle state.
Suggested Remedy
Step | Action |
1 | Make sure that printer is NOT plugged in to any device that may distribute power (such as a power strip or extension wire). |
2 | Perform a How to Print a Continuous Hardware Test Page on a Lexmark Forms Printer 23XX, 24XX, and 25XX to determine whether the issue is Hardware or Software related. - If the test pages print continuously without any issues, then most likely it is software related; please call Lexmark Technical Support and ask to be connected to Software Support for further diagnosis.
- Should printer display the error in the middle of printing the hardware test pages or does not print it all (as the error appears as soon as the printer boots up), please call Lexmark Technical Support and ask to be connected to Hardware Support for further diagnosis.
|
Contacting Lexmark
If you require additional assistance, please close this window and locate
Get In Touch with Lexmark! for contact information.
NOTE: When calling for support, you will need your printer model/machine type and serial number (SN). If you need help locating these, How to Locate the Serial Number on a Lexmark 24xx/25xx/25xx+ Series Forms (Dot Matrix) Printer.Please be near the products described in this article to expedite the support process and reduce callbacks.
LEGACY ID: TE737