Skip to Content Information Center
Lexmark Forms Printer 2590n+

Lexmark Forms Printer 2590n+

TCP/IP installation of a downloaded Lexmark driver in Windows 10 via add printer wizard

About this video

This video is provided for example purposes only. It is intended to familiarize users with the installation of a Universal Print Driver (UPD) PCL XL downloaded from the Lexmark support website.

Note:  If Windows 10 print driver is not yet available, you can use Windows 8 or 8.1 driver packages for Windows 10 supported devices.

The following sequence of procedures you must perform are summarized in the video linked above.

  1. Right-click on the driver package, select Open.

  2. Observe extraction of files to temporary folder.

  3. Accept License Agreement.

  4. Select Extract, this time to a specified folder; i.e., C:\Lexmark\....

  5. Click Start.

  6. Select Add a printer using aTCP/IP address or hostname.

  7. Select Device type: TCP/IP Device.

  8. Enter the IP Address of the device.

  9. Select or highlight the print driver, i.e., Lexmark Universal v2 XL.

  10. Click Next.

  11. Complete the installation.

  12. Verify successful installation via Control Panel > Devices and Printers.


Was this article helpful?