Lexmark T64x, W84x, X64Xe, X85Xe, C77Xn, C52Xn and MarkNet N7000 Series Print Servers: How to Enable/Disable the Banner Page

Single-Function:

T64x, C77Xn and C52Xn

Multifunction: W84x, X64Xe and X85Xe

Solution: MarkNet N7000 Series Print Servers

Audience: All Users

Banner Page Contents

The following information will be seen on the network card banner page:

• Job Owner:

• Host O/S:

• File Name:

• Job Source:

• Queue Name:

Note:

If your observed banner page contains information that differs from the items listed above, it is likely the banner page is originating from somewhere other than the printer.

Banner Page: Embedded Web (http) Server

(C52Xn, T64X, W84X, C77X, X64Xe, X85Xe, N7000e, N7002e)

1. Enter the printer/print server TCP/IP address into the browser's URL address field (e.g.

   http://10.10.10.10

   ).



2. Click Configuration.



3. Click General Settings.



4. Place or remove a checkmark next to Banner Page as appropriate, then click Submit.

Banner Page: Embedded Web (http) Server

(MarkNet N7020e - 4 USB ports)

1. Enter the print server TCP/IP address into the browser's URL address field (see the example in Step 1 above).



2. Click Configuration.



3. Click Network/Ports.



4. Click USB Port Configuration.



5. Place (or remove) a checkmark next to Banner Page for each USB port (1-4).



6. Click Submit.

Banner Page: Operator Panel

(MarkNet N7000e, N7002e, N7020e)

1. Press

   
   .



2. Press

   
   until the LCD displays Network Card. Press
   
   .



3. Press

   
   until LCD displays Banner Page. Press
   
   .



4. Press

   
   or
   
   to toggle between ON and OFF.



5. Press

   
   to save the change. The message Submitting Selection is displayed on the LCD.

Banner Page: Universal Configuration File

(UCF)

- Advanced Users

1. Create a UCF, setting the UCF operator INTBANNERPAGE to 0 (disable) or 1 (enable). Click

   here

   for an example.

NOTE:

32 and 64 bit operating systems require an additional blank line below the UCF operator.

2. FTP

   the file to the printer/print server.

NOTE:

For the X64Xe and X85Xe products, it is recommended to send the file through the

option on the web page. Path: Configuration, Import/Export, Import Settings File.

Banner Page: MVP

MVP does not allow direct control of this feature, but does allow access to the http server via

Web Page (print server)

Related Articles

• For Banner Page information relating to older products, click

  .

• For instructions on sending a UCF file through MVP, click

  .

Have the following available when calling Lexmark Technical Support;

• Printer model(s)

• Printer serial number

• Solution

LEGACY ID: HO2861