Skip to Content Information Center
Lexmark X852

Lexmark X852

The Button for Scan to Network has Disappeared from the MFP Control Panel

What you will see

The Scan to Network icon or button, which initiates your scan from the MFP, is no longer visible.


How to turn ON the "Scan to Network" button

1Open the printer's embedded web server (EWS).

http:// <MFP_IP_Address


, where <MFP_IP_Address> is the IP address of the printer.

2Click Configuration or Settings, and then Embedded Solutions.

Click here.

3Click on the Scan to Network (SNF) embedded solution.
4Click Configure (next to Information).

Place a checkmark next to Always show button.

– Scan to Network (Basic) button

– Scan to Network (Premium) button

Important!The normal behavior (default setting) is to not show this button until a valid (functioning) destination has been created.

Click here.

6Click on Apply.

Click here

to see the troubleshooting portion of the Scan to Network administrators guide.

Still Need Help?

Contact Lexmark Technical Support, or your 'Software Solution' provider, if you require additional technical support. NOTE: You will be asked for your printer model/machine type and serial number (SN) when calling for support. We

Please call from near the computer and printer in case the technician on the phone asks you to perform a task involving one of these devices.


Was this article helpful?