Skip to Content Information Center
Lexmark X642

Lexmark X642

Not your product?

T64x&X64x Print Quality Tool ? Transfer Roll Defect: Partial Area of Image Missing

Issue description

A partial area of the image is missing; such defects often repeat along the page.

Sample printout

Recommended troubleshooting

  1. Print the "Print Defects Guide" to determine which roller in the printer needs to be replaced. To do this, navigate through: Menu > Help > Print Defects Guide.

  2. Clear the paper path of any media, staples, or obstructions.

  3. Try printing on recommended media that is dry and fresh out of a ream.

  4. Check the print cartridge for proper installation. Determine whether the toner level is low and replace the cartridge if needed.

  5. If defect persists, contact Lexmark Technical Support to set up service for the printer.

Contacting Lexmark

Please contact Lexmark Technical Support if you need additional assistance.
NOTE: When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating these.

Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.

LEGACY ID: SO6672
Was this article helpful?


Related content

Top