Skip to Content Information Center
Lexmark MS312

Lexmark MS312

Not your product?

Setting Hibernate Timeout

Hibernate Timeout lets you set the amount of time the printer waits after a print job is processed before it goes into a reduced power state.

    Using the Embedded Web Server

  1. Open a Web browser, and then type the printer IP address in the address field.

    Notes:

    • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
    • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

  2. Click Settings > General Settings > Timeouts.

  3. From the Hibernate Timeout menu, select the number of hours, days, weeks, or months you want for the printer to wait before it goes into a reduced power state.

  4. Click Submit.

    Using the control panel

  1. From the control panel, navigate to:

     > Settings >  > Settings >  > General Settings >  > Timeouts >  > Hibernate Timeout > 

  2. Select the amount of time the printer waits after a print job is processed before it enters Hibernate mode.

  3. Press .
Was this article helpful?


Related content

Top