Skip to Content Information Center
Lexmark CS317

Lexmark CS317

Not your product?

Selecting a location for the printer

CAUTION—POTENTIAL INJURY:  The printer weight is greater than 18  kg (40  lb) and requires two or more trained personnel to lift it safely.

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options, then leave enough room for them also. It is important to:

  • Set up the printer near a properly grounded and easily accessible electrical outlet.
  • Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156 standard.
  • Provide a flat, sturdy, and stable surface.
  • Keep the printer:
    • Clean, dry, and free of dust.
    • Away from stray staples and paper clips.
    • Away from the direct airflow of air conditioners, heaters, or ventilators.
    • Free from direct sunlight and humidity extremes.
  • Observe the recommended temperatures and avoid fluctuations:

    • Ambient temperature

    		15.6 to 32.2°C (60 to 90°F)

    Storage temperature

    		1 to 35°C (34 to 95°F)
  • Allow the following recommended amount of space around the printer for proper ventilation:

    • 1

    Right side

    		152.4 mm (6 in.)

    2

    Front

    		508 mm (20 in.)

    3

    Left side

    		76.2 mm (3 in.)

    4

    Rear

    		101.6 mm (4 in.)

    5

    Top

    		254 mm (10 in.)
Was this article helpful?


Related content

Top