Skip to Content Information Center
Lexmark CS317

Lexmark CS317

Installing a 650‑sheet duo tray

    The printer supports an optional 650‑sheet duo tray (Tray 2) with an integrated multipurpose feeder.

    CAUTION—POTENTIAL INJURY:  The printer weight is greater than 18  kg (40  lb) and requires two or more trained personnel to lift it safely.

    CAUTION—SHOCK HAZARD:  If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

  1. Unpack the optional 650‑sheet duo tray, and then remove all packing material and the dust cover.

  2. Place the tray in the location chosen for the printer.

  3. Align the printer with the 650‑sheet duo tray, and then lower the printer into place.

  4. Install the dust cover.

Note:  When the printer software and any options are installed, it may be necessary to manually add the options in the printer driver to make them available for print jobs. For more information, see Adding available options in the print driver.

Was this article helpful?
Top