Skip to Content Information Center
Lexmark CS510

Lexmark CS510

Replacing a black and color imaging kit

  1. Open the front door.

    CAUTION—HOT SURFACE:  The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.

  2. Open the top door.

  3. Remove the toner cartridges.

  4. Remove the right side cover.

  5. Remove the waste toner bottle.

  6. Lift the blue levers on the imaging kit, and then pull the imaging kit until it stops.

  7. Press down the blue lever, and then grasp the green handles on the sides to pull out the imaging kit.

  8. Unpack the replacement black and color imaging kit.


    • Color imaging kit includes the imaging kit and the cyan, magenta, yellow, and black developer units.
    • Black imaging kit includes the imaging kit and the black developer unit.
  9. Pack the used imaging kit.

    For more information, see Recycling Lexmark products.

    Note:  When replacing the black imaging kit, save the cyan, magenta, and yellow developer units. Dispose only the black developer unit.

  10. Gently shake the yellow, cyan, magenta, and black developer units side‑to‑side.

  11. Remove the red packing strip and the attached fabric from the developer units.

  12. Insert the yellow, cyan, magenta, and black developer units into the matching color slots.

  13. Remove the red packing strip from the imaging kit.

    Warning—Potential Damage:  Do not touch the shiny photoconductor drum under the imaging kit. Doing so may affect the quality of future print jobs.

  14. Align, and then insert the imaging kit.

  15. Push the blue levers down until the imaging kit is fully seated into place.

  16. Insert the waste toner bottle.

  17. Insert the right side cover.

  18. Insert the toner cartridges.

  19. Close the top door.

  20. Close the front door.

Je bil ta članek koristen?